Using The Self-Timer; Configuring File Settings; Configuring Video Format; Changing Gps Settings - HP iPAQ hw6900 User Manual

Hp ipaq hw6900: reference guide
Hide thumbs Also See for iPAQ hw6900:
Table of Contents

Advertisement

Using the Self-Timer

The self-timer determines how quickly the camera takes a picture after you press the shutter button.
1.
Tap the Setup tab > Self-Timer > Change button.
2.
Tap either Off, On - 2 seconds, or On - 10 seconds.
3.
Tap OK.

Configuring File Settings

Use File Settings to specify how pictures are named and stored in addition to adjusting the picture
counter.
1.
Tap the File tab and change one or more of the following:
Filename prefix — The text added at the beginning of the filename.
Counter value — The number (between 0000 and 9999) that automatically increases each
time a picture is taken. This number is added to the filename prefix.
Save picture in — The folder or storage card where the pictures are saved. The default folder
on the device is \My Documents\My Pictures\.
2.
Tap OK.

Configuring Video Format

Use Video Format to specify the video format and size, along with a record audio option for when you
film a video clip.
1.
Tap the Video tab.
2.
Select the video format and size of your choice.
3.
Select Record audio check box.
4.
Tap OK.

Changing GPS Settings

The GPS setting allows tagging pictures with the location of where they were captured.
1.
Tap the GPS tab.
2.
Select the Enable GPS check box.
3.
Select the Auto-detect button to discover the GPS Port and Baud rate needed for your device.
NOTE
can get a good signal from GPS satellites.
82
Chapter 6 Camera (select models only)
NOTE
You can save the filename prefix with any alpha numeric character and certain
symbols.
To use the GPS feature within the camera, take pictures outside where the HP iPAQ
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipaq hw6910Ipaq hw6915Ipaq hw6955Ipaq

Table of Contents