Turn Bluetooth On And Off; Make My Hp Ipaq Invisible To Other Bluetooth Devices - HP iPAQ hw6510 Manual

For more information on Bluetooth, refer to "Using Bluetooth" in Chapter
9 of the User's Guide located on the Companion CD or go to the HP Web
site and chat with an online agent. For instructions on how to chat with an
online agent, refer to the question
Not Covered in This Booklet?"
How Do I Turn Bluetooth On and Off?
To turn on Bluetooth from the Today screen, tap the iPAQ Wireless icon
in the Command bar, and then tap the Bluetooth icon. When
Bluetooth is on, the Bluetooth LED on the top of your HP iPAQ
blinks blue.
NOTE: You must turn on Bluetooth before you can select the Manager
or Settings boxes.
Now that you have turned on Bluetooth, you are ready to transfer files,
connect to a Bluetooth printer, synchronize with your computer, and more.
To turn off Bluetooth, tap the Bluetooth icon again. When Bluetooth is
off, the Bluetooth LED stops blinking and no incoming or outgoing
Bluetooth connections are possible.
TIP: To save battery power, turn off Bluetooth when you are not using it.
How Do I Make My HP iPAQ Invisible to Other
Bluetooth Devices?
If you want to change your Bluetooth settings on your HP iPAQ so that your
unit cannot be seen by other Bluetooth-enabled devices, follow
these steps:
From the Today screen, tap Start > Settings.
1.
Under the Connections tab, tap the Bluetooth icon.
2.
"How Do I Find Information On Topics
found at the end of this document.
46