View Pictures That I've Already Taken - HP iPAQ hw6510 Manual

When you snap a picture, your HP iPAQ makes an audible shutter sound
(if you have not muted the sounds). The clock indicates a picture has been
taken and the HP iPAQ processes the picture. It might take a few
seconds to process and store the picture, depending on its size, quality,
and complexity.
Immediately after taking a picture, Instant Review automatically
displays three icons so you can decide to either delete, e-mail, or keep
the picture.
6. Tap one of the three icons to perform the following functions:
•
•
•
For more information on troubleshooting the way pictures appear on your
HP iPAQ screen, refer to "Using the Camera Features" in Chapter 10 of
the User's Guide located on the Companion CD.
How Do I View Pictures That I've Already Taken?
NOTE: The built-in camera is available only on select HP iPAQ models.
To view pictures using your HP iPAQ, follow these steps:
From the Start menu, tap Programs > HP Image Zone.
1.
2. Tap a thumbnail (i.e., a small representation of a larger image) to
select the picture. A preview of the picture and information about
it displays.
To view images in a different folder:
Tap the Folder icon
1.
bottom of the screen.
2. Select the desired folder.
Tap OK.
3.
Trash can icon - to delete the current picture
Envelope e-mail icon - to attach the picture to an MMS
message and e-mail it
OK icon - finished reviewing the picture and decide to keep it
located in the Command bar at the
41