Non-Combustible Materials; Combustible Materials - Vermont Castings Defiant Flexburn 1975 Installation Manual

NOTE: This installation must conform with local codes.
In the absence of local codes you must comply with the
UL1482-11, UL 737-11, (UM) 84-HUD and NPFA211 in
the U.S.A.
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
For assistance or additional information, consult a qualified
installer, service agency or your dealer.
NOTE: Hearth & Home Technologies, manufacturer of this
appliance, reserves the right to alter its products, their
specifications and/or price without notice.
Hearth & Home Technologies WILL NOT warranty
appliances that exhibit evidence of over-firing. Evidence of
over-firing includes, but is not limited to:
• Warped Damper
• Deteriorated refractory
• Deteriorated interior components
C. Non-Combustible Materials
Material which will not ignite and burn, composed of any
combination of the following:
- Steel
- Brick
- Concrete
- Glass
Materials reported as passing ASTM E 136, Standard
Test Method for Behavior of Metals, in a Vertical Tube
Furnace of 750° C.
D. Combustible Materials
Material made of/or surfaced with any of the following
materials:
- Wood
- Plant Fibers
- Plywood/OSB
Any material that can ignite and burn: flame proofed or not,
plastered or non-plastered.
4
- Plaster
- Iron
- Tile
- Slate
- Compressed Paper
- Plastic
- Sheet Rock (drywall)
Vermont Castings • Defiant Flexburn 1975 Installation Manual_R1 • 2021 - ___ • 08/21 8390-035i