Equipment Care And Maintenance; Applying Oil To Equipment - Delta S Series Installation And Maintenance Instructions Manual

Delta Electronics Servo Press S-Series Installation and Maintenance Instructions

5. Equipment Care and Maintenance

5.1 Applying Oil to Equipment

Please replenish the spindle lubricant. Replenish the oil through the inlet shown in the figure.
Regular oil replenishment is required to prevent shortening the machine's working life.
*It is recommended to use NSK LR3.
*Recommended oil injector: KCG-470H (Brand: Alba)
*Single injection volume: 40 ml
Oil hole
(M6)
Force
measurement
and calibration
Load cell
buffer tool
Caution: When replenishing the lubricant, make sure to shut down main power first.
18