Advertisement
Delete the Error
Delete Error History information stored on
History
the unit.
SD card WRITE
Check SD card WRITE function with SD
check
card slot.
AV4(V) / AV1
Set input to AV4 (V) and set output to AV1
(RGB) I/O Setting
(RGB) for I/O checking
AV2(Y/C) / AV1
Set input to AV2 (Y/C) and set output to
(V) I/O Setting
AV1 (V) for I/O checking
AV2(V) / AV1
Set input to AV2 (V) and set output to AV1
(Y/C) I/O Setting
(Y/C) for I/O checking
AV2(RGB) / AV1
Set input to AV2(RGB) and set output to
(V) I/O Setting
AV1(V) for I/O checking
Timer Microprocessor IC7501-83 output
P50(H) Output
High signal for AV1-pin 10 passing through
inverter (approx. 0V DC at AV1-pin 10).
Timer Microprocessor IC7501-83 output
P50(L) Output
Low signal for AV1-pin 10 passing through
inverter (approx. 4.4V DC at AV1-pin 10).
Tray
The RAM drive tray is opened and closed
OPEN/CLOSE
repeatedly.
Test
Error code
Initialization of the last error code held by
initialization
timer (Write in F00)
Last Drive Error, Error history and Error
Initialize Service
Codes stored on the unit are initialized to
factory setting.
Finishing service
Release Service Mode.
mode
displayed.
(Indicating unit: Second)
When the WRITE check is
OK.
When the WRITE check is
NG.
*Note:
The image stored in the SD
card will be erased.
When OK.
When NG.
When OK.
When NG.
"*" is number of open/close
cycle times.
Display in STOP (E-E) mode. Press power button on
Press [9] [7] in service
mode.
Insert a SD card to SD
card slot, and press [7]
[4] in service mode.
*Insert SD card while the
power is off.
*Check for [CARD SD]
display on the FL display
and go on the
procedure.
Press [8] [0] in service
mode.
Press [8] [1] in service
mode.
Press [8] [2] in service
mode.
Press [8] [3] in service
mode.
Press [8] [4] in service
mode.
Press [8] [5] in service
mode.
Press [9] [1] in service
mode
*When releasing this
mode, press the
[POWER] button of
Remote Controller more
than 10 seconds.
Press [9] [8] in service
mode.
Press [9] [9] in service
mode.
the front panel or
Remote controller in
service mode.
Advertisement
