Advertisement
Switch Interlace and Progressive in EE
mode.
*Initial setting is "Interlace".
I/P Switch
*This command is effective during
executing "White Picture Output", "Magenta
Picture Output" and "RTSC Return in XP (A
& V)" modes.
Audio Mute
Check whether mute is applied normally by
(XTMUTE)
the timer microprocessor.
Audio Mute
Check whether mute is applied normally by
(XDMUTE)
the Digital P.C.B..
The audio pattern stored in the internal
memory is output
(Lch: 1kHz/-18dB)
Audio Pattern
(Rch: 400Hz/-18dB)
Output
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
HDD READ
Perform a complete read inspection of the
inspection
HDD.
Laser Used Time
Check laser used time (hours) of drive.
Indiction
Delete the Laser
Laser used time stored in the memory of
Used Time
the unit is deleted.
Switch
Initial mode is Interlace
Switch Interlace/Progressive
Initial mode (Audio 48kHz)
Audio 44.1kHz/48kHz
switching
When the HDD is OK
If the HDD is defective
•(*****) is the used time
display in hour.
•Laser used time of DVD/ CD
in Playback/Recording mode
is counted.
1. Error Number is displayed
for 5 seconds.
2. Time when the error has
occurred is displayed for 5
seconds.
Y: Year
MM: Month
DD: Day
hh: Hour
Return XP mode.
*48 kHz / 44.1 kHz are
switched alternately.
Press [1] [4] in I/P
Switch mode.
*I/P are switched
alternately.
Press [2] [1] in service
mode.
Press [2] [2] in service
mode.
Press [2] [3] in service
mode.
Press [2] [4] in Audio
Pattern Output mode.
*48 kHz / 44.1 kHz are
switched alternately.
Press [3] [1] in the
service mode.
*When canceling the
checking mode while
executing, do "forced
power-off".
Method:
Press the "POWER"
button more than 10
seconds.
Press [4] [1] in service
mode.
Press [9] [5] in service
mode.
Advertisement
