Advertisement
ATP re-
Re-execute ATP.
execution
Progressive
The progressive setting is initialized to
initialization
Interlace.
9.3 Service Modes
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneously for five seconds.
Mode name
Item of Service Mode executing is
Release Items
cancelled.
Last Error Code of U/H/F held by Timer is
Error Code
displayed on FL.
Display
*Details are described in "9.1. Self-
Diagnosis Functions".
Region code, MAIN firm version, TIMER
firm version and DRIVE firmware versions
ROM Version
are displayed on FL for five seconds per
Display
each version in order, but ROM version will
be left displayed.
White picture is output as component
Output from AV Decoder.
White Picture
*White picture
Output
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
Magenta picture is output with Component
Output from AV Decoder.
Magenta Picture
*Magenta picture
Output
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by "I/P switch: [1] [4]"
RTSC Return in
AV1 input signal is encoded (XP), decoded
XP
(XP) and output decoded signal to external
(A & V)
without DISC recording and DISC playback.
Item
Description
Display "LOCK" for 3
seconds.
Display at ATP executing.
The display before
execution leaves.
FL display
''*'' are version displays.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
Initial mode: EE2/ Interlace/
XP/ Audio 48kHz
Switch Interlace/Progressive
Audio 44.1 kHz/ 48 kHz
while the tray being locked.
When the power is on (E-E
mode), press [CH UP] and [CH
DOWN] simultaneously for 5
seconds.
When the power is on (E-E
mode), press [STOP] and
[PLAY] simultaneously for 5
seconds.
Key operation
(Remote controller key)
Press [0] [0] or [Return]
in service mode.
Press [0] [1] in service
mode
Press [0] [2] in service
mode
Press [1] [1] in service
mode.
Press [1] [4] in White
Picture Output mode.
*I/P are switched
alternately.
Press [1] [2] in service
mode.
Press [1] [4] in Magenta
Picture Output mode.
*I/P are switched
alternately.
Press [1] [3] in service
mode.
Press [1] [4] in RTSC
Return XP mode.
*I/P are switched
alternately.
Press [2] [4] in RTSC
Advertisement
