Advertisement
Restoration
SELF CHECK
operation
32 programs are
Full Program
already set.
Unformatted disc
UNFORMAT
error
Unit is in
PLEASE
termination
WAIT
process
9.2 Special Modes Setting
Mode name
*All the main unit s parameters (include
TEST Mode
tuner) are initialized.
Rating
The audiovisual level setting password is
password
initialized to "Level 8".
Setting every kind of modes for
servicing.
Service Mode
*Details are described in " 9.3. Service
Mode ".
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-
off mode.
*When Timer REC is ON, execute "
Forced disc eject " after releasing Timer
REC.
Forced disc
*This command is not effective during
eject
"Child lock" is ON.
While Demonstration Lock is being set,
this Forced disc eject function is not
accepted.
Child
Set or release "Child Lock".
lock/unlock
NTSC/PAL
To switch PAL/NTSC alternately.
system select
Since the power cord fell out during a
power failure or operation, it is under
restoration operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there is the possibility that
defective Digital P.C.B. / RAM drive.
32 programs are already set.
You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment.
Unit is in termination process now.
"BYE" is displayed and power will be
turned off.
In case "Quick Start" of setup menu is
ON, it is displayed in restoration
operation for AC off.
Item
Description
error."
No display
No display
No display
FL display
The display before
execution leaves.
The display before
execution leaves.
Display for 5 seconds.
Key operation
Front Key
Press [STOP], [CH UP] and
[OPEN/CLOSE] keys
simultaneously for 5 seconds
when power is off.
Open the tray, and press
[REC] and [PLAY]
simultaneously for 5 seconds.
NOTE:
Drive should be selected to
DVD.
When the power is off, press
[CH UP], [OPEN/CLOSE] and
[REC] keys simultaneously for
5 seconds.
When the power is off, press
[STOP] and [CH UP] keys
simultaneously for 5 seconds.
Press [ENTER] and [RETURN]
by remote controller
simultaneously until [X-HOLD]
is displayed.
While the power is on (E-E
mode), press [STOP] and
[OPEN/CLOSE]
simultaneously for 5 seconds.
Advertisement
