Optional Accessories - Tripp Lite UPB-20K0-2U1C Owner's Manual

Optional Accessories

• M100-Series USB to Lightning Cables
• U030-Series USB 2.0 A to 5-Pin Mini-B Cables
• U038-Series USB 2.0 A to USB Type-C Cables
• U326-Series USB 3.0 A to Micro-B Cables
• U420-Series USB 3.1 Type-C M/M Cables
• U422-Series USB 3.1 Type-C to USB 3.0 Type-B Cables
• U426-Series USB 3.1 Type-C to USB 3.0 Micro-B Cables
• U428-Series USB 3.1 Type-C to USB Type-C Cables
• U280-W01-QC3-1 1-Port USB Wall Charger
Power Bank Charging Instructions
Notes:
• A power button is located on the side of the power bank. When pressed once,
the LEDs will illuminate to indicate the power bank's remaining battery capacity.
When all devices are disconnected, the power bank will stop any device charging
taking place.
• When charging the power bank, the LEDs will illuminate to indicate the battery
capacity level (see table below):
LED Status
●●●●
●●●◎
●●◎○
●◎○○
◎○○○
● = LED Illuminated
○ = LED Off
◎ = LED Flashing
1. Using the included USB Type-C cable, connect the In/Output USB Type-C
port on the power bank to the appropriate USB port on your computer or
USB Charger.
2. The power bank will begin charging, with the LEDs operating per the
above notes and table.
Power Bank Battery Capacity
100%
75% - 99%
50% -74%
25%-49%
1% - 24%
4