System Requirements; Optional Accessories - Tripp Lite UPB-12K0-S2X2U Owner's Manual

System Requirements

• Smartphone, tablet or other mobile USB device

Optional Accessories

• M100-Series USB to Lightning
• U030-Series USB 2.0 A to 5-Pin Mini-B Cables
• U038-Series USB 2.0 A to USB Type-C Cables
• UR05C-Series Micro-B Charge-Only Cables
• U326-Series USB 3.0 A to Micro-B Cables
• U420-003 USB 3.1 Gen 1 (5 Gbps) Type-C M/M Cable
USB Device Charging Instructions
Notes:
• Before charging your devices for the first time, you should first fully charge the power bank
• There is a power button located on top of the power bank. When pressed once, the LEDs will
illuminate to indicate how much battery capacity is left. When held down, this button turns off the
LEDs and stops any device charging.
• When charging a USB device, the LED indicators illuminate to indicate the level of battery capacity
1. Connect your mobile devices to the USB-A ports on the power bank using the included
USB Micro-B cable or a USB cable suitable for your device.
2. The devices will begin charging, with the LEDs operating per the above notes.
Power Bank Charging Instructions
Notes:
• There is a power button located on top of the power bank. When pressed once, the LEDs illuminate
to indicate how much battery capacity is left. When held down, this button turns off the LEDs and
stops any device charging.
• When charging the power bank, the LEDs will illuminate to indicate the level of battery capacity
1. Using the included USB Micro-B cable, connect the Micro-B port on the power bank to
the USB-A port on a computer or USB charger.
2. The device will begin charging, with the LEDs operating per the above notes.
17-05-361-9336EC.indb 3
Cables
®
LED Status Battery Capacity
100-75%
50-75%
25-50%
1-25%
0%
LED Status Battery Capacity
100%
75-99%
50-75%
25-50%
1-25%
= lit; = unlit
= lit; = unlit;
3
= flashing
6/7/2017 1:39:19 PM