Note :
Follow the disassembly procedure in the numerical order given.
2-1.
CABINET (REAR) ASSY
Note :
On installation of cabinet (rear), adjust the knob (earphone/speaker) and switch positions until they agree.
2 Screw (M1.7 × 5)
1 Open the lid, battery case
7 Cabinet (rear) assy
6 Open the cabinet from
the recessed areas.
(Remove the 9 claws.)
2-2.
MAIN BOARD
Note :
On installation of cabinet (rear), adjust the knob (earphone/speaker) and switch positions until they agree.
4 Screw (B1.4 × 6)
DISASSEMBLY
5 Screw (M1.4 × 10)
Claws
3 Remove two solders
of speaker leads.
SECTION 2
4 Screw (M1.7 × 5)
Claws
3 Open the lid, ear-phone
Knob (EAR/SP)
Switch
2 Remove two solders
of terminal, battery.
6 Main board
5 Claw
8 Spring compression
— 3 —
Claws
Claws
Switch
1 Knob(HOLD)
7 Button(NOISE CUT)