Zener 8000 Application Manual page 9

Application SW08024: PID Irrigator
Application 'CONFIG' & 'USER' Menu:
There are now 2 additional menus with this application, a 'CONFIG MENU' and a 'USER MENU'.
CONFIG MENU
The 'CONFIG MENU' is created for initial
setup. This can be found in the A00 DEFAULT'
Menu and has all the parameters required.
General access to this menu can be locked
out.
ESC
PID Irrigator
user menu
A00 DEFAULTS
PID Irrigator
config (default)
PARAMETERS IN MENU:
Rated motor amps
Overload current
Motor RPM
Transducer units
Transducer scale
Pressure Ref 1
Pressure Ref 2
Pressure Ref 3
Pressure Ref 4
Pressure Tol.
Pressure Q time
Low Bore Timeout
No flow Q time
Hi Pressure Lvl
Minimum Speed
Pipe Fill
Fill Speed(Hz)
Fill to Level
Fill Time(s)
Page 8 Document: IM00160A
ESC
DOWN
ENTER
&
DOWN
ENTER
Rated Motor Amps
20 Amps
DOWN
Always remember to press 'ENTER' when
prompted to save changes.
"WHEN EXITING MENU"
Do not remove power while saving!!
15/07/19
USER MENU
The 'USER MENU' is created for the operator.
In this application it provides access to the 'Set
pressure' only. Access to other settings can be
locked out.
PID Irrigator
user menu
Pressure Ref 1
PARAMETERS IN MENU:
Pressure Ref 1
Pressure Ref 2
Pressure Ref 3
Pressure Ref 4
Pressure Tol.
Pressure Q time
Low Bore Timeout
No flow Q time
ESC
SAVE CHANGES
ENTER=YES ESC=NO
ENTER
100.0 psi ENTER to edit
and
ENTER to save
changes
ENTER