Technical Data - BorMann PRO BSS5300 User Manual

EN
Warning symbols
WARNING-To reduce the risk of injury, user must read instruction
manual.
Always wear ear protection
Always wear goggles
Always wear a breathing mask
In accordance with essential applicable safety standards of Euro-
pean directives
Machine-related safety instructions
– Harmful/toxic dust can be produced during your work (e.g. lead-containing paint, some types of wood and metal). Contact with this dust, especially inhaling
it, can represent a hazard for operating personnel or persons in the vicinity. Comply with the safety regulations that apply in your country. Connect the electric
power tool to a suitable extraction system.
To protect your health, wear a P2 protective mask.
Always wear protective goggles to protect against sanding hazards.
– Use a residual current protective device when metal grinding, as well as when the operation of the power tool in a wet environment cannot be
avoided. In the event of an electric shock, the protective switch protects you against life-threatening current through the body.
– Clean work equipment soaked in oils, for example sanding pad or polishing felt, with water and allow to dry. Work equipment soaked in oil may
combust spontaneously.
– Attention: Risk of fire! Avoid overheating the grinding material and the sander. Always empty the dust container before taking a break. Swarf in
the filter bag or filter of the mobile dust extractor may self-ignite in unfavourable conditions such as flying sparks when grinding metals. Particular
danger exists if the swarf is mixed with paint, polyurethane residue or other chemical materials and the grinding material is hot after long periods
of work.
– Always use original sanding pads. Foreign pads are not suitable for the speed of the sander and may break.
– If the power tool is dropped or falls, check for damage to the machine and sanding pad. Remove the sanding pad for closer inspection. Repair
damaged parts before using again. Broken sanding pads and damaged machines can cause injuries and machine instability.
Mixed dust containing metal and sanding damp surfaces
When mixed dust containing metal (such as dust resulting from paint sanding in the automotive field) and when sanding damp surfaces, the
following measures must be observed for reasons of safety:
– Connect the machine to a suitable dust extractor.
– Regularly blow out the motor housing of the machine to remove dust deposits

Technical data

Voltage/Frequency:
Power:
Speed (max.):
Sanding pad diameter:
Weight:
4
230-240V~,50Hz
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
350W
notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in
the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with
10000/min
similar features and may not be included in the product you just acquired.
150mm
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty
will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
1.75kg
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work,
including maintenance and special adjustments, must only be carried out by technicians of the authorized service department
of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause
malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages
resulting from the use of non-conforming equipment.
WWW.BORMANNTOOLS.COM