Table of Contents
Advertisement
Cleaning the Tank
If you notice an odor from the tank
1
Remove the tank from your
robot mop.
2
Fill the tank with warm water.
Do not use boiling water.
3
Close cap and lightly shake
the tank.
4
Rinse the tank and repeat
as necessary.
Cleaning the Drip Tray
1
Remove the robot from the
charging station.
2
Separate the drip tray by lifting it up
from charging station.
3
Clean the drip tray with a damp cloth or
with warm water in sink.
4
Dry thoroughly before reattaching
the drip tray to the charging station.
5
Put your robot mop back onto the
charging station.
Caring for Washable Cleaning Pads
Note:
You can clean your washable pads
two ways: either by hand washing, or in a
washing machine.
Hand Washing
Thoroughly wash the pad with warm water.
Machine Washing
Wash using the warm cycle, then air dry.
Do not put in dryer. Do not wash with delicates.
Braava jet
m6 Owner's Guide
®
EN
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Braava jet m6 and is the answer not in the manual?
Questions and answers
I assume the iRobot Braava jet m6 connects with my cell phone like your vacuums do. Also, is filling the tank required on every cleaning episode? Also does iRoomba supply the cleaning solution and mops to operate the unit?
Yes, the iRobot Braava jet m6 connects to a smartphone through the iRobot HOME App. It is necessary to fill the tank before each cleaning if the robot senses it's empty, indicated by a red sweeping light. iRobot provides cleaning solution (Bona packages) and includes disposable wet and dry pads, as well as a washable microfiber pad.
This answer is automatically generated