Page 2
About Your Braava jet m6 Robot Mop ® Top View Accessing the Tank Lid Latch Lid Latch HOME Button Rear Docking Sensor CLEAN Button Camera SPOT Clean Button Easy-Carrying RCON Sensor Handle Precision Jet Spray Tank Cap Opening Nozzle Tank Pad Ejection Button Folding...
1.5 ft/0.5 m 4 ft/1.5 m 1.5 ft/0.5 m WARNING: To prevent the risk of your robot falling down stairs, ensure that the charging station is placed at least 4 feet (1.2 metres) away from stairs. For more information, visit global.irobot.com...
Page 4
Wake up your robot Connect and update Place the drip tray onto the front of the Slide your robot onto the charging Connect your robot to the iRobot Home charging station. station contacts to activate the battery. App to allow remote control, cleaning The light ring will light up after a few customisation and to keep your robot’s...
Page 5
Attach a cleaning pad Slide a wet mopping or dry sweeping pad Cleaning Pad Types onto the underside of the robot. WET MOPPING PADS Single-Use Wet Mopping Pad Washable Wet Mopping Pad (Microfibre) Detach an existing cleaning pad by pressing DRY SWEEPING PADS the button on the front of the robot.
Fill the tank Fill to the top with water. Remove the tank from the robot. Add iRobot® Hard Floor Cleaning Solution (if using). 2 fl oz 13 fl oz 59 mL 385 mL Cleaning Solution When wet mopping, you may add iRobot®...
Page 7
(Sold separately) • Within the iRobot Home App, you can adjust cleaning preferences to modify cleaning power, speed and coverage. • Your robot will automatically explore and clean your home, moving in a methodical manner across the floor, with some overlap from one pass to the next to ensure that every spot on the floor is cleaned three times.
• Slide your robot onto the charging station contacts to activate the battery. For the best results, only use the iRobot Lithium Ion Battery that comes with your Braava jet® m6. Note:Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job.
Wipe clean with a damp cloth. around the wheels. Clean the sensors on the bottom of your robot with a damp cloth. Important: Do not spray cleaning solution or water onto the sensors or sensor openings. For more information, visit global.irobot.com...
Cleaning the Tank Cleaning the Drip Tray Caring for Washable Cleaning Pads If you notice an odour from the tank Remove the robot from the charging station. Remove the tank from your robot mop. Note: You can clean your washable pads in two ways: either by hand washing or in a Separate the drip tray by lifting it up washing machine.
Regulatory Information Regulatory Model: RMA-Y1 The iRobot Corporation hereby declares that this radio equipment Instructions for Disposal of Waste Electrical & Electronic device is in compliance with the EU Radio Equipment Directive Equipment: 2014/53/EU and the RoHS Directive 2011/65/EU. The full text of the...
Get hints and tips to improve your product performance questions, and information about accessories. This information can also be found in the iRobot Home App. If you need further assistance, call the US Get answers to questions Customer Care team at (877) 855-8593.
Need help?
Do you have a question about the Braava jet m6 and is the answer not in the manual?
Questions and answers