Doosan DISD SD 310 Shop Manual page 438

Install the two closing covers.
NOTE:
Wet sealing surfaces with Loctite (Type-No.270)!
( S ) Driver
( S ) Handle
Fasten closing covers by means of hex. Head
screws and mount screw plug (Arrow).
NOTE:
In tall new flat gasket as well as O-Ring !
Torque limit
(Hex. head screws M8/8.8)
Torque limit
(Screw plug M22x1.5)
Assemble flat gasket and fasten speedometer
(compl.) by means of hex. head screws on the gear
case.
Torque limit (M8/8.8)
SPC000007
Page 210
5870 057 015
5870 260 002
23 Nm
60 Nm
23 Nm
Figure 82
Figure 83
Figure 84
Transmission and Torque Converter