Doosan DISD SD 310 Shop Manual page 354

Measure Dimension
face/bearing rollers to the flange-mounted surface.
DimensionⅡ e.g.
Example "C", for the determination of the housing
dimension
Dimension Ⅰ e.g.
Dimension Ⅱ e.g.
Difference = Housing
dimension e.g.
Place clutch on a suitable surface plate and
determine Dimension
face/cylindrical rollers to the surface plate.
Dimension Ⅲ e.g.
Example "D", for the determination of the installation
dimension
Dimension Ⅲ e.g.
End play e.g.
gives installation dimension
- Clutch
Example "E", for the determination of the shim
Housing dimension e.g.
Installation dimension - Clutch
Difference = Shim e.g.
Insert clutch K4/KR by means of lifting device into
the housing and position it.
( S ) Lifting device
SPC000007
Page 126
Ⅱ
from the butting
21,00 mm
251,15 mm
- 21,00 mm
230,15 mm
111 from the
227,20 mm
227,20 mm
+ 0,20 mm
227,40 mm
230,15 mm
- 227,40 mm
2,75 mm
5870 350 041
Figure 149
end
Figure 150
Figure 151
Transmission and Torque Converter