Advertisement
4.2. Manual Activation
Press the "signal key" or "level key" once to activate the device.
After activating the device, the screen lights up and displays the last displayed result.
After the device is activated, if there is no operation within 30 seconds, the screen will turn off and enter sleep mode.
If it is activated again within 30s after the previous activation, the device starts to update the signal value in real time.
4.3. Function Key
The device can detect the signal strength and display signal level of the scanning area.
1. Detect Signal Strength:
Press the signal key, the LCD will display the current detected signal strength and update the signal value in real time.
2. Display Signal Level:
Press the level key, the LCD will display the current signal level and update the level value in real time.
4.4. LCD Interface
R716S display four digits.
1. Press the signal key, and it will display the signal strength in four digits.
2. Press the level key, and it will display the signal level in the fourth digit.
The Range Of Signal Strength Level:
≤ -100
RSSI
Signal Level
4.5. Sleep Mode
1. After the device is powered on, if there is no operation within 30 seconds, it will enter sleep mode.
2. After the device wakes up, the last value will be displayed. If there is no operation within 30s, it will enter sleep mode.
≥ -99
≥ -93
0
1
2
≥ -89
≥ -86
≥ -83
3
4
5
6
≥ -80
≥ -75
≥ -70
6
7
8
≥ -55
9
Advertisement
