BorMann BWR5137 Manual page 4

EN
Storing the Crane
1. Lower the Lifting Arm.
2. Place the handle in the upright position.
3. Store in a dry location, recommended indoors.
Note: If the crane is stored outdoors, be sure to lubricate all parts before and after use to ensure the crane stays in good working condition.
Factory Product
Any hydraulic jack found to be damaged in any way,is found to be worn or operates abnormally,believed to have subjected to an abnormal load."SHALL BE RE-
MOVED FROM SERVICE UNTIL REPAIRED".Owners and/or operators should be aware that repair of the equipment requires specialized knowledge and facilities.
Only factory authorized parts,labels and decals shall be use on this equipment. Call customer service department Annual inspection of the is recommended
and should be made by the manufacturer's authorized repair facility to ensure that your jack is in optimum conditions and that the jack has correct decals and
safety labels specified by the manufacturer.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes sig-
nificantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may
also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine
is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
4
WWW.BORMANNTOOLS.COM