Microwave Oven; Installation; Grounding Instructions - Vitek Diamond VT-1652 Manual Instruction

Vt-1652.qxp 04.02.2005

MICROWAVE OVEN

Parts List
1. Protective locks
2. Window
3. Ventilation openings
4. Axis
5. Roller ring
6. Rotating tray
7. Control panel
8. Heating element
9. Grill cover
10. Steamer kit
PRECAUTIONS, WHICH MUST BE
FOLLOWED IN ORDER TO AVOID
EXPOSURE TO MICROWAVE ENERGY
1. Do not attempt to use the microwave oven
when the door is open as you risk exposure
to harmful microwave energy. It is very
important not to damage or ruin the internal
protective locks.
2. It is especially important that the door be
closed firmly. Do not place foreign objects
between the door and the microwave body
and make sure that dirt and/or cleaning
liquids do not drip into the insulative layer.
3. Do not use the microwave oven if it is
damaged; especially make sure that:
a. the door is not bent;
b. the hooks and locks are not broken or
weakened;
c. the door's insulative layer has not been
damaged.
4. Only a qualified specialist should maintain
or service the microwave oven.
BEFORE CONTACTING A SERVICE
CENTER
1. Make sure that the oven is correctly
connected to AC power. If there is a
problem with this, unplug the cord from the
power source, wait 10 seconds, then
reconnect the oven to power.
2. Check if power is being supplied.
3. Make sure the control panel is programmed
correctly and that the timer is not activated.
4. Make sure the door is closed and latched
while the oven is operating.
9:45 Page 3
3

INSTALLATION

1. Make sure to remove the packing material
from the microwave oven.
2. Systematically check the oven for any
damage. Do not use the oven if the locks or
door are broken, or if there is damage to the
internal parts of the oven. Contact a service
center if you find these types of damage.
3. The oven should be installed on a flat, stable
surface.
4. Do not install the oven near sources of high
temperatures or humidity.
5. Provide for proper ventilation of the oven,
by leaving the following free space around
the oven: above - 20 cm, behind - 10 cm, on
the sides - 5 cm each.
6. Do not use the oven without the glass tray.
Install the tray and other accessories
correctly.
7. Place the rotating tray into the oven; match
the grooves on the axis with the lip of the
tray. Make sure that it is properly installed
on the roller ring and that the ring is inside
the central circle on the bottom of the oven.

GROUNDING INSTRUCTIONS

This device should be grounded. In case of
short-circuit, the ground reduces the risk of
electric shock because the power surge can
leave through the grounding wire. A grounded
cord and plug has been supplied with this
microwave oven. The plug is then connected to
an outlet that has been grounded properly.
WARNING: The use of a grounded outlet, as a
rule, does not lead to the risk of electric shock.
Consult with qualified service specialists if the
grounding instructions are not clear or if you
are unsure as to whether or not your oven is
properly grounded.
Radio static
1. Use of the microwave oven can create static
for radios, television, and other devices
operating nearby.
2. To avoid static:
a) firmly close the microwave oven door;
b) adjust the antenna on the radio or television;
c) relocated the oven farther from the device;
d) connect the microwave oven to a different
outlet in order to avoid interference of the
devices.
ENGLISH