Assembling Instructions - Hyundai H-SF16-RC01 Instruction Manual

GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
 Important safeguards. read carefully and keep for future reference.
 Incorrect operation and improper handling can lead to malfunction of the appliance
and injuries to the user.
 Before connecting the appliance for the first time check that voltage indicated on the
rating label corresponds to the mains voltage in your home.
 For home use only. Do not use for industrial purposes. Do not use the appliance for
any other purposes than described in this instruction manual.
 Do not use outdoors.
 The appliance is not intended for use for physically, sensory or mental disabled
person (including children) or for person with lack of life experience or knowledge, if
only they are under supervision or have been instructed about the use of the unit by
responsible person.
 Children must be under control in order not to be allowed to play with the appliance.
 Always unplug the appliance from the power supply before cleaning and when not in
use.
 To prevent risk of electric shock and fire, do not immerse the appliance in water or
any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it
immediately and check in a service center.
 Do not use the device in bathrooms and near water.
 Do not place the appliance near heat sources.
 Do not leave the appliance switched on when not in use.
 Do not use other attachments than those supplied.
 In case of power cord is damaged, its replacement should be done by the
manufacture or service department or the other high-skill person to avoid any
danger.
 Keep the cord away from sharp edges and hot surfaces.
 Do not pull, twist, or wrap the power cord around the appliance.
 Avoid contact with moving parts of the device. Do not put pencils or other objects
through the protective grid of the fan.
 Do not operate without fan installed protective grid.
 Do not attempt to repair, adjust or replace parts in the appliance. Repair the
malfunctioning appliance in the nearest service center.
 If the product has been exposed to temperatures below 0ºC for some time it should
be kept at room temperature for at least 2 hours before turning it on.
 The manufacturer reserves the right to introduce minor changes into the product
design without prior notice, unless such changes influence significantly the product
safety, performance, and functions.
 Manufacturing date is indicated on the unit and/or on packing as well as in
accompanying documents in the following format XX.XXXX where first two figures
XX is the month of production, and following four figures XXXX is the year of
production.

ASSEMBLING INSTRUCTIONS:

 The device is intended for air circulation in the room.
 Fan is packed disassembled. Before assembling make sure that all the required
parts are undamaged and included into the set.
 Do not plug in the device before its assembling is finished.
6