Table of Contents
Advertisement
Available languages
Available languages
Do not attempt to repair, adjust or replace parts in the appliance. Repair
the malfunctioning appliance in the nearest service center.
If the product has been exposed to temperatures below 0ºC for some
time it should be kept at room temperature for at least 2 hours before
turning it on
The manufacturer reserves the right to introduce minor changes into the
product design without prior notice, unless such changes influence
significantly the product safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on packing as well as
in accompanying documents in the following format XX.XXXX where first
two figures XX is the month of production, and following four figures
XXXX is the year of production.
ASSEMBLING INSTRUCTIONS
The device is intended for air circulation in the room.
Fan is packed disassembled. Before assembling make sure that all the
required parts are undamaged and included into the set.
Fix fan control box to the base or to the clip and tighten with a screw.
With the help of a clip fix the fan onto the base or any other appropriate
surface.
The device is ready for operation
CAUTION:
Do not plug in the device before its assembling is finished.
Do not operate the appliance with damaged blades.
OPERATION
FAN OPERATING MODES
To switch the fan on put the mode switch to 1 or 2 position:
-1 -means low speed of fan
-2- means high speed of fan
To switch the fan off put the mode switch to 0 position
Air flow direction can be changed by adjusting fan control box in a higher
or lower position by a vertical adjustment screw.
VERTICAL ADJUSTMENT
Air flow direction can be changed by adjusting fan control box in a higher
or lower position by a vertical adjustment screw.
MAINTENANCE
Before cleaning unplug fan first.
Clean the fan and blades with soft cloth moistened with soap solution.
Do not use abrasive cleansers, gasoline, solvents or other aggressive
detergents.
7
Advertisement
Table of Contents
