Light Indicators; Remote Controller - Hyundai H-SF16-RC01 Instruction Manual

 Tighten stand tube to stand base with screw. Fix base cover to stand base with a
screw (supplied with a set).
 Unscrew out-joint, put the stand cover and base cover on the stand base, pull the
extension pole out then tighten the out-joint again.
 Place control box firmly on top of extension pole, tighten screw B.
 Unscrew the blade cap by turning clockwise and rear grill nut by turning counter
clockwise and put both blade cap and rear grill nut off the motor shaft.
 Put rear grille on motor shaft.
 Secure it with rear grille nut.
 Slide blades on motor shaft so that claws on motor shaft match the blades slots.
 Screw blade cap on shaft by turning counter clockwise.
 Put front grille on rear grille and close clips or screw grille ring to secure grilles
together.
 Adjust the fan vertically by vertical adjustment screw.
 The fan is ready for work.
OPERATION MANUAL
 CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan
under the conditions of increased humidity.
 Place fan only onto dry flat unyielding surface.
BUTTONS:
 On/Speed - button switches on the power.Speed button switches the fan on and
shifts between different speeds.
 Off - button switches the fan off.
 Swing – rotation mode.
 Timer button helps to adjust fan operating time up to maximum time of 7 hours and a
half. Each pressing of this button adds half an hour of fan operating time. For
example, if you wish to set operating time of 5 hours and a half, you need to do the
following: Press the button "Timer" several times and see on display: 0.5h, 1h, 4h,
that means you have set 5.5h.

LIGHT INDICATORS:

 0.5h...4h - fan operating time set;
 H – high speed;
 M – middle speed;
 L – minimum speed;
 SLP
- air stream by weak waves;
 RHY - air stream by intense waves.

REMOTE CONTROLLER:

 On / Speed buttons switches the fan on and shifts between different fan operating
modes.
 Off button switches the fan off.
 Swing – rotation mode.
 Timer button helps to adjust fan operating time. Each pressing of this button adds
half an hour of fan operating time.
 Mode button helps to choose operating mode of fan:

SLP - air stream by weak waves;

RHY - air stream by intense waves.
 NOTE: Remote controller operates on two АAA 1.5V batteries which are not
included.
7