General Problems Or Technical Faults - Miele SmartLine Tepan Yaki Operating And Installation Instructions

Problem solving guide

General problems or technical faults

Issue
The SmartLine element
cannot be switched on.
An operating noise can
be heard after the
SmartLine element has
been switched off.
42
Cause and remedy
There is no power to the SmartLine element.
 Check whether the mains fuse has tripped.
Contact your Miele dealer (for the minimum fuse
rating, see data plate).
There may be a technical fault.
 Disconnect the SmartLine element from the mains
electricity supply for approx. 1 minute by
– tripping the relevant mains fuse or screwing the
fuse out completely, or
– switching off the residual current protection
device.
 If, after resetting the trip switch in the mains fuse
box or the residual current protection device, the
SmartLine element will still not switch on, contact
your Miele dealer.
The cooling fan runs until the SmartLine element
has cooled down and then switches off
automatically.