Miele SmartLine Tepan Yaki Operating And Installation Instructions page 10

Hide thumbs Also See for SmartLine Tepan Yaki:
Table of Contents

Advertisement

Warning and Safety instructions
During installation, maintenance and repair work, the Tepan Yaki
must be completely disconnected from the mains electricity supply.
It is only completely isolated from the electricity supply when:
- the mains fuse is disconnected,
- the screw-out fuse is removed (in countries where this is
applicable),
- the plug (if present) is removed from the socket. To do this, pull
the plug and not the mains connection cable.
Danger of electric shock.
Do not use the appliance if it is faulty. Switch it off immediately,
disconnect it from the mains electricity supply and contact your
Miele dealer.
If the Tepan Yaki is built in behind a furniture front (e.g. a door), do
not close the furniture door while the Tepan Yaki is in use. Heat and
moisture can build up behind the closed furniture door. This can
result in damage to the Tepan Yaki, the housing unit and the floor. Do
not close the furniture door until the residual heat indicators have
gone out.
10

Advertisement

Table of Contents
loading

Table of Contents