Table of Contents
Advertisement
Safety features
Safety switch-off
Sensor controls are covered
Your SmartLine element will turn off
automatically if one or several of the
sensor controls remain covered for
longer than 10 seconds, for example,
by finger contact, food boiling over or
by an object such as an oven glove or
tea towel. flashes briefly above the
sensor control and a tone will sound.
If you remove the obstruction and/or
clean the appliance, goes out and the
SmartLine element is ready for use
again.
Excessive operating time
The safety shut-off is triggered
automatically if a heating element is
heated for an unusually long period of
time. This time depends on the power
level selected. If it has been exceeded,
the heating element turns off and the
residual heat indicator appears. The
SmartLine element can now be used
again as normal.
The SmartLine element is
programmed to safety setting 0 at the
factory. If required you can set a
higher safety setting with a shorter
maximum operating time (see chart).
32
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Setting
range").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
5:00
10:00
7:00
4:00
5:00
4:00
3:00
5:00
3:30
2:00
4:00
2:00
1:30
4:00
1:30
1:00
4:00
1:00
0:30
4:00
0:42
0:24
4:00
0:30
0:20
4:00
0:30
0:18
1:00
0:24
0:10
2
Advertisement
Table of Contents
