Protecting Your Product From Theft; Flow From Startup To Termination - Pioneer AVIC-F220 Operation Manual

Chapter
02 Before you start
4 Touch [OK].
The navigation system restarts.
After a short pause, the navigation screen re-
turns.
5 Check that the following screen is dis-
played.
6 Press the middle of the SD memory
card gently until it clicks.
The SD memory card is ejected.
7 Pull the SD memory card out straight.
10
Engb
8 Touch [Restart].
The navigation system restarts.
After a short pause, the navigation screen re-
turns.
Protecting your product
from theft
The detachable device can be removed from
the base unit to discourage theft.
= For details, refer to Removing the detach-
able device on page 7.
Flow from startup to
termination
1 Start the engine to boot up the system.
2 Press the MODE button of the AV recei-
ver.
After a short pause, the navigation screen ap-
pears.
p The display will turn off if you press the
MODE button of the AV receiver immedi-
ately after the navigation system restarts, so
wait (approximately 10 seconds) after re-
start before pressing the MODE button.
= For details of the operations, refer to Screen
switching overview on page 12.
3 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.