Spare Parts; Ordering Spare Parts - unicraft EKZT Series Operating Instructions Manual

Spare parts

12 Spare parts
DANGER!
Risk of injury due to the use of
wrong spare parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
Using non-approved spare parts voids the manu-
facturer's warranty

12.1 Ordering spare parts

The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of construction on the type plate which is fi-
xed on the compressor.
16
Example
The support hook for the EKZT 5-1 must be ordered. The
carrying hook has the position number 26 in the spare
part drawing.
- Type of device: Elektrokettenzug EKZT 5-1
- Item number: 619 4005
- Position number: 26
The order No. is: 0-6194005-26
The order number consists of the item number, the posi-
tion numner and one digit in front of the item number.
- Place the digit 0 in front of the item No.
- Also place the digit 0 in front of the position No 1 th-
rough 9.
EKZT-Series | Version 1.04