Connecting Devices - HP zx2000 Getting Started Manual

connecting devices

power, keyboard and mouse
Å
Getting Started Guide
Before connecting any cords or cables to your system, please read the
Warning Notices in the front of this manual.
To connect the power, keyboard and mouse:
1. Connect the power cords to the rear of the monitor and the
computer.
2. Connect both power cords to a grounded outlet (for tower
systems) or to a power distribution unit (PDU) on the rack (for
racked systems).
3. Connect the keyboard and mouse. This system uses Standard 104
keyboard with a USB connector. Plug them into the USB ports on
the back of the system. (Ports are labelled.)
WARNING: For your safety always connect equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such as the
one provided with the equipment, or one in compliance with your national
safety standards. To ensure that the equipment can be disconnected from the
power by removing the power cord from the outlet, the equipment must be
located close to an easily accessible power outlet.
Setting Up and Using Your System
1–7