BWI Eagle AIR-EAGLE XLT PLUS Product Information Bulletin

AIR-EAGLE
900MHz RF Transceiver
MODEL 461-40800-AC
DESCRIPTION
The A -E XLT P RF T
IR AGLE LUS
control of electronic equipment and apparatus at distances up to 1 mile
away (longer ranges can be achieved with external antennas). This
model comes equipped with eight dry contact inputs and eight relay
outputs. This allows the user to not only transmit information out but
receive a confirming signal back that the operation was performed A
terminal strip has been provided for interfacing with external dry
contact inputs as well as dry contact relay outputs. The Air-Eagle XLT
TRX is user-programmable for up eight network frequencies to allow
multiple systems to operate simultaneously in the same area.
INSTALLATION
DISCONNECT AC Power from all equipment before installation.
1. Mount the A -E XLT PLUS R
IR AGLE
2. Install input and output wiring to terminal strip.
3. Install antenna to connector located on the right side on the
enclosure.
4. Connect supplied power input cable to your external power source.
DIMENSIONS
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
® XLT PLUS
provides two-way wireless
RANSCEIVER
in a convenient location.
ECEIVER
PRODUCT INFORMATION
BULLETIN
TERMINAL STRIP WIRING
RELAY OUTPUTS
1 N/O Relay #1 10 N/O Relay #4
2 C Relay #1 11 C Relay #4
3 N/C Relay #1 12 N/C Relay #4
4 N/O Relay #2 13 N/O Relay #5
5 C Relay #2 14 C Relay #5
6 N/C Relay #2 15 N/C Relay #5
7 N/O Relay #3 16 N/O Relay #6
8 C Relay #3 17 C Relay #6
9 N/C Relay #3 18 N/C Relay #6
CONTACT INPUTS
1 Common Input 1 10 Input 5
2 Input 1 11 Common Input 6
3 Common Input 2 12 Input 6
4 Input 2 13 Common Input 7
5 Common Input 3 14 Input 7
6 Input 3 15 Common Input 8
7 Common Input 4 16 Input 8
8 Input 4 17 Not Used
9 Common Input 5 18 Not Used
AC POWER INPUT
Terminal #1
Terminal #2
19 N/O Relay #7
20 C Relay #7
21 N/C Relay #7
22 N/O Relay #8
23 C Relay #8
24 N/C Relay #8
100-250 VAC
100-250 VAC