Download Print this page

Kolpin 1466 Product Instructions

Kawasaki teryx - rear windshield panel

Advertisement

Quick Links

Kawasaki Teryx - Rear Windshield Panel
Product Instructions | Part No: 1466
Application:
Verify accessory fitment at Kolpin.com.
Before You Begin:
Read these instructions and check to
be sure all parts are accounted for. If any items are missing,
do not return to the store. Call us at 1-877-956-5746 for
assistance. Please retain these instructions for future refer-
ence and parts ordering information.
Dealers:
Provide Instruction Manual to customer at time of
purchase.
Tools Required:
4mm Hex Wrench or Socket, 10mm
Wrench, Phillips Head Screwdriver, and Torque Wrench
5
4
7
8
9
7
8
3
9
8
7
7
8
10
11
6
5
Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442
(877) 956-5746 or (763) 478-5800 |
© 2020 Kolpin Outdoors Inc.
Product Contents:
Item Description
1
Upper Panel
2
Lower Panel
3
Clamp - 1.75" Diameter
4
Clamp - 2.00" Diameter
5
Clamp Spacer - 1.6mm Thick
6
Clamp Spacer - 4.6mm Thick
7
Button Head Screw - M6 x 18mm
8
Lock Washer - M6
9
Domed Shoulder Washer - M6
10 Flat Shoulder Washer - M6
11 Lock Nut - M6
12 Nylon Spacer - 14mm Lg
*Extra Component Quantity Provided Can Be Discarded
1
7
8
9
www.kolpin.com
|
customerservice@kolpin.com
1
REV 01
Qty
Part Number
1
1
4
K100137 (Qty 2)
2
K100121 (Qty 1)
6
K100138 (Qty 2)
(*8 Provided)
4
K100130 (Qty 2)
22
22
16
K100172 (Qty 2)
4
4
Not Used
(*4 Provided)
2

Advertisement

loading

Summary of Contents for Kolpin 1466

  • Page 1 Not Used 12 Nylon Spacer - 14mm Lg (*4 Provided) *Extra Component Quantity Provided Can Be Discarded Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442 (877) 956-5746 or (763) 478-5800 | www.kolpin.com customerservice@kolpin.com © 2020 Kolpin Outdoors Inc.
  • Page 2: Assembly Time

    Attach the two 2.00” Diameter Clamps [Item 4] to the top half of the Upper Panel and the four 1.75” Diameter Clamps [Item 3] to the lower half of the Upper Panel as shown. The Kolpin logo on the 2.00” Diameter Clamps should face outside the vehicle. The Kolpin logo on the 1.75”...
  • Page 3 Attach the Upper Panel assembly to the vehicle Roll Cage. Loosely install the hardware into each Clamp. The rubber Clamp Spacers [Items 5 &6] will be installed in later steps. See Illustration 1-3. Ill. 1-3 © 2020 Kolpin Outdoors Inc. REV 01...
  • Page 4 Attach the Lower Panel to the Upper Panel as shown. The Lower Panel should be attached to side facing the front of the vehicle on the Upper Panel. See Illustration 1-4. Ill. 1-4 Re-install the OEM Screws from Step 5 into the lower two holes of the Lower Panel. See Illustration 1-5. Ill. 1-5 © 2020 Kolpin Outdoors Inc. REV 01...
  • Page 5 13. Remove the protective film from BOTH sides of the Windshield Panel. Protective film may be clear on one or both sides which can be difficult to see. Re-inspect hardware before and after riding or trailering. © 2020 Kolpin Outdoors Inc. REV 01...
  • Page 6: One Year Limited Warranty

    One Year Limited Warranty For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts found upon ex- amination by Kolpin to be defective in material, workmanship, or both.