Download Print this page

Kolpin 31-0010 Assembly And Installation Manual

Snow plow blade wings

Advertisement

Quick Links

SNOW PLOW BLADE WINGS
P/N 31-0010
ASSEMBLY / INSTALLATION MANUAL
Application
PLOW BLADES NO. 31-0048, 31-0052, 31-0060, 31-0066 or 31-0072
Before you begin, please read these instructions and check to be sure all parts and tools are
accounted for. The following instructions contain details required to install and service the contents
of this kit.
© 2018 Kolpin Outdoors Inc.
REV 00

Advertisement

loading

Summary of Contents for Kolpin 31-0010

  • Page 1 Before you begin, please read these instructions and check to be sure all parts and tools are accounted for. The following instructions contain details required to install and service the contents of this kit. © 2018 Kolpin Outdoors Inc. REV 00...
  • Page 2: Safety Information

    NOTICE Plow operation requires additional components for operation: Kolpin Plow Blade, Kolpin Plow Push Frame, High Rise Plow Push Frame, Winch Kit, Mid-Body ATV / UTV Plow Mount * *These components may be specific to your vehicle. Please read and understand all assembly instructions, notices and warnings before assembling and operating your plow system.
  • Page 3 Right Top Edge Adapter Bracket (not shown) Instruction Guide (not shown) Depending on generation of plow blade, the kit will contain extra parts that are used for earlier models. Extra parts can be discarded. © 2018 Kolpin Outdoors Inc. REV 00...
  • Page 4: Before You Begin

    BEFORE YOU BEGIN: TOOLS REQUIRED: Your Kolpin accessory is exclusively designed for 13mm Wrench • • your vehicle. 13mm Socket • Please read and understand all instructions. • 9.0mm Drill Bit for older generation blades • Verify all parts and tools are accounted for.
  • Page 5 52”-72” Ill. 2-2 Item #3 Item #3 Item #1 Item #3 Item #3 Item #9 (and #10) is not used for 48” blades. Ill. 2-4 Ill. 2-3 © 2018 Kolpin Outdoors Inc. REV 00...
  • Page 6: One Year Limited Warranty

    One Year Limited Warranty For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts found upon examination by Kolpin to be defective in material, workmanship, or both.