READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO
AVOID INJURY TO YOURSELF, DAMAGE TO THE VEHICLE OR ACCESSORY.
• Torque specifications must be followed when tightening bolts. Over-tightening any and/or all screws will cause
• As specified on carton label, once protective film on shields is removed, product cannot be returned.
• As specified on carton label, damage caused by packaging staples is not covered by warranty. All staples must
• Failure to follow these installation instructions completely may void any warrantable components and result in
• Do not use Loctite or any other similar fastener adhesive. These types of products react to plastics and cause
• Our windshields are made from the highest quality material providing optimum transparency and clarity.
Blurriness and/or extrusion marks may or may not appear when looking through windshield from a wide, side-
• The application of improper cleaners, abrasive and/or dirty cleaning towels can severely damage the product.
Failure to follow cleaning recommendation (provided herewith) may void any warrantable components.
These instructions contain important information for future reference and must be given to the customer at time of
ITEM
PART NAME
A
Rear windshield
B
Lower panel
C
Clamp set (1 ¾" dia.)
D
Rear windshield hardware
INSTRUCTION
E
Foam cushion
BAG
F
Clamp set (1 ¾")
G
Rear lower panel hardware
There is two versions of the RZR XP 900 and the installation procedures for the lower panel are different for
both of them. Read both Step 1A and Step 1AA to select the appropriate method for your vehicle.
Over-tightening any and/or all screws will cause cracks around mounting holes which is not covered by any
2727 - Instructions POLARIS RZR Rear Windshield Combo GP - rev01
IMPORTANT NOTICES
• For proper installation, TWO people are required .
cracks around mounting holes which is not covered by any warranty.
be removed prior to removing product from carton.
product damage or personal injury.
cracking. Not covered by any warranty.
angle. This is normal for all extruded clear plastic materials.
purchase or upon completion of installation.
Parts List
(parts available with kit only and not available separately)
Includes : 2 male clamp parts, 2 female clamp parts, 2 socket cap screws M8x35, 2 lock washers M8 and 2
Includes : 4 button head screws M8 x 25, 8 washers M8, 4 shoulder washers M8 and 4 locknuts M8
Included : 40" of 1" x 1/16" self adhesive foam cushion [end user to cut to exact length]
Includes : 3 male clamp parts, 3 female clamp parts, 3 socket cap screws M8x35, 3 lock washers M8, 3
Includes : 3 button head screws M8 x 25, 2 button head screws M8 x 30, 10 washers M8, 4 rubber
bushings M8, 5 locknuts M8, 2 philips truss screw M6 x 20, 2 plastic washer M6 and 2 threaded insets M6
IMPORTANT NOTICES
INSTALLATION INSTRUCTIONS
POLARIS RANGER RZR XP900
REAR WINDSHIELD & LOWER PANEL COMBO
PART # 2727
DEALER
DESCRIPTION
CNC rear windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
CNC rear lower panel cut-out made of 3/16" black polyethylene
locknuts M8
locknuts M8 and 3 round clamp spacers (1 ⅛" long)
warranty.
www.kolpin.com
QTY
1
1
2
1
1
1
1
1