Mounting Aid - HP xw6200 Installation Instructions Manual

Mount into Rack
1. Insert the inner rails into the outer rails.
2. Push the workstation to slide it all the way into the rack.
3. Secure the workstation in the rack by tightening the thumb screws on the mounting flanges.

Mounting Aid

1. Place the next page on the bottom of the rack (or on top of an already installed unit in a rack).
2. Align the circles with the rack holes to determine a 4U space.
3. The 4U space will be the top of the workstation after it is installed.
4. Mark the center at 2U. This will be the center line of the slides.
Sliding Rack Mount Kit Installation
Page 8 of 10