Download Print this page

HP xw6200 Mini White Paper

Setting up sata raid on the hp
Hide thumbs Also See for xw6200:

Advertisement

Setting Up SATA RAID on the HP xw8200/xw6200
Mini-White Paper
Introduction......................................................................................................................................... 2
Steps.................................................................................................................................................. 2
Install Drives .................................................................................................................................... 2
Enable RAID .................................................................................................................................... 2
Configure the RAID Volume ............................................................................................................... 3
Set the Boot Order ........................................................................................................................... 3
Rebuild the OS on the new RAID Volume ............................................................................................ 4

Advertisement

loading

Summary of Contents for HP xw6200

  • Page 1 Setting Up SATA RAID on the HP xw8200/xw6200 Mini-White Paper Introduction............................2 Steps..............................2 Install Drives ............................ 2 Enable RAID ............................ 2 Configure the RAID Volume ....................... 3 Set the Boot Order ........................... 3 Rebuild the OS on the new RAID Volume .................... 4...
  • Page 2: Install Drives

    Introduction This document details the steps needed to set up RAID 0 and RAID 1 disk configurations on HP xw8200/xw6200 Workstations. Additional information on these RAID modes can be found in the Workstation RAID Primer mini-white paper which can be found by visiting and selecting the www.hp.com/support/xw6200_manuals...
  • Page 3: Configure The Raid Volume

    Configure the RAID Volume 6. When the system comes up, it will prompt you to enter the Intel RAID for Serial ATA – RAID ® Configuration Utility. Press CTRL-I to enter the utility. Screen 2 Intel ® RAID for Serial ATA – RAID Configuration Utility 7.
  • Page 4: Rebuild The Os On The New Raid Volume

    Screeen 5 Disk/Volume Information © 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

This manual is also suitable for:

Xw8200