Adjusting The Monitor - Fujitsu FD-1000AT User Manual

Adjusting the Monitor

The five buttons and two LEDs on the monitor are explained in order from left to right.
Power button: Power button: Push this button to turn on the power to the monitor. Also,
Power lamp (green): This lamp lights when the power to the monitor is on and goes
Indicator lamp (orange): This lamp lights when the monitor is in energy-saving mode.
Menu button: Push this button to adjust the monitor.
▼Button: Push this button when selecting downward and to change values in a
decreasing direction.
▲Button: Push this button when selecting upward and to change values an
increasing direction.
Button: Push this button to select or enter things.
CAUTION
pushing this button while the monitor is on cuts the power to the
monitor.
out when the power to the monitor is off.
You can eliminate screen noise by adjusting the
on the setting menu.
Be careful when applying a strong force to the equipment when
the Console Drawer is pulled out and the monitor is opened and
being used, as there is a risk that the rack may fall over.
Do not strongly press on the monitor's screen, scratch it with
sharp objects or place magnetic objects near it. Doing so may
damage the monitor.
PHASE
1 7