Adjusting The Monitor - Fujitsu RC25 User Manual

11-3. Adjusting the Monitor

The five buttons and one LED on the monitor are described in order:
AUTO/EXIT
button
Power button:
Power LED:
MENU/SELECT button: Press this button to open the menu, to select an item to be adjusted,
UP button:

DOWN button:

AUTO/EXIT button:
It is possible to directly adjust the screen brightness by pressing the
button when the menu is not displayed.
It is possible to perform automatic adjustment (position and focus) by
pressing the AUTO/EXIT button when the menu is not displayed.
Direct button operations
 and  buttons
DOWN UP
button button
Press this button to turn on the power to the monitor, or, if the power
is already on, to turn off the power to the monitor.
This LED lights green when the power to the monitor is on, and
lights orange when the monitor is in energy-saving mode. The light
goes off when the monitor is turned off.
and to save an adjusted setting.
Press this button to select the right-hand item or to increase the
value.
Press this button to select the left-hand item or to decrease the
value.
Press this button to close the menu, to cancel the selection of an
item to be adjusted, to cancel an adjusted setting, or to perform
automatic adjustment.
MENU/SELECT
button
AUTO/EXIT button
16
Power Power
LED button
or
 