Connecting To Ports - Fujitsu FD-1000AT User Manual

Connecting to Ports

(When CRT/KB Switcher is attached to the back of the Console Drawer.)
CAUTION
You can connect as many servers as there are ports.
1. Connect the keyboard cable to the KB port, the mouse cable to the Mouse port and
the monitor cable to the COMMON DISP port.
2. Use the dedicated cable to connect the server keyboard port (PS/2) and the mouse
port (PS/2) to the KB/Mouse port (6-pin mini DIN).
3. Connect the terminal monitor cable to the 1 DISP port (15-pin mini D-SUB).
Adhere to the cautions in [Connecting and Removing Cables]
when connecting and disconnecting ports. Also, cut the power of
the effected equipment while you are working.
Connecting ports diagram
If you are using a separate CRT/KB switcher, rather than the back
of the Console Drawer, refer to the operation manual for the
CRT/KB switcher.
1 3