Wireless Remote Controller - Hitachi RPIL-1.0PNN1DH Service Manual

1. OPTION LIST
1.2 Wireless remote controller (Model：HCRB31NEGH)
Remote controller
The remote controller transmits signals to the system.
MODE
1
Press this button to select the operation mode.
SUPER
3
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
16℃(61°F) set temp automatically; Fast heating
operates at auto fan speed with 30℃(86°F) set
temp automatically).
SMART
(invalid for multi system)
6
Used to enter fuzzy logic operation directly.
TIMER
8
Used to set or cancel the timer operation.
QUIET
9
Used to set or cancel Quiet Mode operation.
IFEEL
11
Press to set IFEEL Mode operation.
In IFEEL mode, the Air Conditioner
operates basis temperature sensor
fitted in remote instead of machine,
Advice to use IFEEL mode and put the
remote controller where the indoor unit
receive signal easily.
SLEEP
13
Used to set or cancel Sleep Mode operation.
Indication symbols on LCD:
Cooling indicator
Auto Auto fan speed
Lower fan speed
IFEEL
Note: ●Each mode and relevant function will be further specified in following pages.
●For purpose of explanation,all parts of the display are shown.During actual operation,only the relevant items will be displayed.
2
1
3
6
9
12
13
Fan only indicator
Dry indicator
Higher fan speed High fan speed
Economy indicator
Quiet indicator
Display temperature
4
5
7
8
10
11
10
12
19
14
14
Heating indicator
Medium fan speed
Super indicator
ON Display set timer
OFF
Display current time
11
TEMP
2
Used to adjust the room temperature and
the timer, also real time.
POWER
4
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
FAN SPEED
5
Used to select fan speed in sequence auto,
low, medium and high.
SWING
7
Used to stop or start horizontal
louver swinging and set the desired up/
down airflow direction.
SWING
Used to stop or start vertical adjustment
louver swinging and set the desired left/right
airflow direction.
DIMMER
When you press this button, all the display
of indoor unit will be closed. Press any
button to resume display.
CLOCK
Used to set the current time.
Smart indicator
S S M M A A R R T T
Low fan speed
Sleep indicator
adjustment