Table of Contents
Advertisement
1. OPTION LIST
Operation modes
Selecting mode
Press
button once by once
The operation modes changed in sequence:
Result :
PRESS
Heating mode is NOT available for cooling only air conditioner.
FAN mode
Press
button once by once
Result :
The fan speed is changed in sequence:
Auto
PRESS
At "FAN ONLY" mode, only "Auto" is not available.
At "DRY" mode, Fan speed is set at "AUTO" automatically, "FAN SPEED" button
is ineffective in this case.
Setting temperature
Press
button once
Result :
Raise temperature setting by 1℃
Press
button once
Result :
Lower temperature setting by 1℃
Turning on or off
Press
button can change the unit operating status.
SMART, SUPER, QUIET, TIMER, IFEEL, CLOCK and SLEEP operation modes will be specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
COOLING
Auto
Low
Medium
or
DRY
FAN ONLY
High
1°F
*HEATING, COOLING
or
1°F
*Note:
Press and hold "
together will alternate the temperature display between
the ℃ and °F scale.
*Note: Heating mode is NOT available for cooling only models.
* * Note
: At "Dry" mode, a decrease or rise of up to 7℃ can be set
with
Remote controller if you still feel uncomfortable.
13
HEATING
Range of available set temperature
16℃~30℃(61
DRY
±7 deg C
unable to set
FAN ONLY
s and hold "
" button and "
°
°
F~86
F)
"
button
Hide quick links:
Advertisement
Table of Contents
