Parkside PWBM A1 Operation And Safety Notes Translation Of The Original Instructions page 45

Use personal protective equipment. Always wear eye
b)
protection. Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries .
Prevent unintentional starting. Ensure the switch is in
c)
the off‑position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power tools
that have the switch on invites accidents .
Remove any adjusting key or wrench before turning the
d)
power tool on. A wrench or a key left attached to a rotating part of
the power tool may result in personal injury .
Do not overreach. Keep proper footing and balance at
e)
all times. This enables better control of the power tool in unexpected
situations .
Dress properly. Do not wear loose clothing or jewellery.
f)
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in moving
parts .
If devices are provided for the connection of dust
g)
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce
dust-related hazards .
GB/IE 43