Ossila Solar Cell I-V Test System User Manual page 13

Solar Cell I-V Test System (Automated) User Manual
Figure 9.1. Solar Cell I-V software: The Characterisation tab.
9.1.2 Lifetime
The Lifetime tab tracks PCE, FF, J , and V over time by performing periodic I-V measurements and
sc oc
analysis. Between I-V measurements, the solar cell can be held at short-circuit, open-circuit, or
maximum power.
Figure 9.2. Ossila Solar Cell I-V software: The Lifetime tab.
9.1.3 Stabilised Current
The Stabilised Current tab lets you measure the evolution of the photogenerated current at
specific voltages.
Ossila.com 12 Ossila Limited © 2022