Device Options - HP xw4000 Supplementary Manual

Computer Setup (Continued)
Heading
Advanced*
(continued)
*For advanced
users only.
✎
Support for specific Computer Setup options may vary depending on your hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Device Options

Description
Allows you to set:
• Printer mode (bi-directional, EPP & ECP,
output only).
• Num Lock state at power-on (off/on).
• PME (power management event) wakeup
events (enable/disable).
• Processor cache (enable/disable).
• ACPI S3 support (enable/disable). S3 is
an ACPI (advanced configuration and
power interface) sleep state that some
add-in hardware options may not support.
✎
ACPI S3 selections are supported on
select models only. If the ACPI S3
support option is not presented, the other
ACPI S3 options (ACPI S3 Video REPOST,
ACPI S3 Hard Disk Reset, and ACPI S3
PS2 Mouse Wakeup) will not be
available.
• ACPI S3 Video REPOST (enable/disable).
This feature reruns the video option ROM
on a boot from the S3 state (available on
select models only).
Computer Setup (F10) Utility
21