Advanced; Power-On Options - HP xw4000 Supplementary Manual

Computer Setup (Continued)
Heading

Advanced*

*For advanced
users only.
✎
Support for specific Computer Setup options may vary depending on your hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Power-On Options

Description
Allows you to set:
• POST mode (QuickBoot, FullBoot, or
FullBoot every 1–30 days).
• POST messages (enable/disable).
• Safe POST (enable/disable). Enabling this
feature allows the ROM to monitor add-in
cards during boot. If an add-in card does
not work or initialize correctly, then on the
next boot all cards will be skipped during
POST. (This feature is supported on select
models only.)
• F9 prompt (enable/disable). Enabling
this feature will display the text "F9 = Boot
Menu" during POST. Disabling this feature
prevents the text from being displayed.
However, pressing the F9 key will still
access the Shortcut Boot [Order] Menu
screen. See Storage > Boot Order for
more information.
• F10 prompt (enable/disable). Enabling
this feature will display the text
"F10 = Setup" during POST. Disabling
this feature prevents the text from being
displayed. However, pressing the F10
key will still access the Setup screen.
• F12 prompt (enable/disable). Enabling
this feature will display the text
"F12 = Network Service Boot" during
POST. Disabling this feature prevents the
text from being displayed. However,
pressing the F12 key will still force the
system to attempt booting from the
network.
Computer Setup (F10) Utility
17