Recovering the Configuration Settings
Method Two: Save to Diskette and Restore from
Diskette
✎
A–2
This method of recovery requires that you first perform the Save to
Diskette command with the Computer Setup (F10) Utility before
Restore is needed. (See File > Save to Diskette above.)
It is recommended that you save the computer's configuration to
a diskette after configuring it, and save the diskette for possible
future use.
To restore the configuration, insert the diskette with the saved
configuration into the floppy drive and perform the Restore from
Diskette command with the Computer Setup (F10) Utility. (See File >
Restore from Diskette above.)
Computer Setup (F10) Utility Guide