Sony SEL85F14GM Service Manual page 10

HELP08
1. When connecting the LF-2141 Flexible Board to the CL-1040 Board, attach it correctly as shown in the figure below.
OK
LF-2141 Flexible Board CL-1040 Board
Connector
LF-2141 Flexible Board
CL-1040 Board
2. When connecting the Flexible Board (Stator Assy B) to the CL-1040 Board, attach it correctly as shown in the figure below.
CL-1040 Board
OK
CL-1040 Board
Connector
Flexible Board Flexible Board
(Stator Assy B) (Stator Assy B)
3. Match the holes and convex portion of the CL-1040 board and attach it to the Outer Assy Service (9139).
Install the Flexible Board (Stator Assy B) as shown in the figure below.
Flexible Board
(Stator Assy B)
Convex portion
Hole
CL-1040 Board
SEL85F14GM (FE 1.4 / 85 GM) (FE 85mm F1.4 GM)
NG
CL-1040 Board
LF-2141 Flexible Board
NG
Flexible Board
(Stator Assy B)
CL-1040 Board
Flexible Board (Stator Assy B)
HELP09
Adhesive bond (B-10): J-6082-612-A
1. Pass the Main FPC Assy (9139) through the small hole of Outer Assy Service (9139).
2. Pass the Flexible Board (Stator Assy B) through the large hole of Outer Assy Service (9139).
3. Insert the connector portion of Main FPC Assy (9139) to the groove of Outer Assy Service (9139).
4. Tighten the four screws.
5. Apply the adhesive bond (B-10) to the screw head.
Small hole
Groove
Main FPC Assy (9139)
Connector portion
(Main FPC Assy (9139))
2-7
Apply the adhesive
bond (B-10)
Screw
Large hole
Outer Assy Service (9139)
Flexible Board
(Stator Assy B)