Mocka Zander Side Table Assembly Instructions

Zander Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions for correct assembly. While we took great
effort to ensure these assembly instructions were correct at the time of
printing, sometimes updates are required post production. For the most
up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
A
dowel
x8
D
bolt large allen key
x4
Hardware Supplied
Phillips screwdriver required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
B C
bolt screw
x8 x8
F
E
allen key
x1 x1
1