Kenwood NX-1000 Series User Manual page 76

SELECTING THE ENCRYPTION KEY
1 Press the button programmed as [Scrambler/ Encryption Code] to enter
Scrambler/ Encryption Code Mode.
Alternatively, press the button programmed as [Menu] to enter Scrambler/
•
Encryption Code Mode using the Menu Mode.
2 Select the new Encryption key using the [ <B ] and [ C> ] buttons.
• Up to 16 Encryption keys can be used. One of these keys will be used
during transmission.
3 Press the [ S ] button to set the new Encryption key.
76