Kenwood NX-1000 Series User Manual page 64

Squelch Level
Allows you to adjust the transceiver squelch level.
1 PF Button:
Press the programmed button to enter Squelch Level Adjustment Mode.
Menu Mode:
Select "
SQL LEVEL
Mode.
2 Press the [ <B ] and [ C> ] buttons to increase and decrease the squelch level
from 0 (open) to 9 (tight).
3 Press the [ S ] button to confirm and exit mode.
Squelch Off [Analog/ NXDN/ DMR]
Allows you to turn the transceiver squelch off, to better hear weak signals on the
channel.
PF Button:
Press the programmed button to activate/ deactivate the Squelch Off.
Menu Mode:
Select "SQL OFF" and press the [ S ] button to activate/ deactivate the Squelch
Off.
• The " " indicator appears while Squelch Off is activated.
Squelch Off Momentary
PF Button:
Press and hold the programmed button to momentarily turn the transceiver
squelch off. Releasing this button turns the transceiver squelch back on. While
squelch is off, you can better hear weak signals on the channel.
[Analog]
" and press the [ S ] button enter Squelch Level Adjustment
[Analog/ NXDN/ DMR]
64